K��resel Vana (Ball Valves) 2 Par��al��, 3 Par��al��

ITEM PARTS METERIAL
V-2C V-2
1 BODY ASTM-A216WCB ASTM-CF8M-A351
2 BODY CAP ASTM-A216WCB ASTM-CF8M-A351
3 BALL ASTM-CF8-A351 ASTM-CF8M-A351
4 SEAT BALL PTFE 15% GLASSFIBER REINFOCED
5 STEM AISI 304 AISI 316
6 BODY SEAL PTFE PTFE
7 THRUST WASHER PTFE PTFE
8 PACKING PTFE PTFE
9 GLAND NUT AISI 304 AISI 304
10/11 NUT & WASHER STEEL NICKEL AISI 304 
12 HANDLE STEEL NICKEL AISI 304
13 PLASTIC COVER PLASTIC PLASTIC

STAINLESS STEEL: AISI-316(DIN,1.4408) (ASTM-CF8M-A351)

                               AISI-304(DIN 1.4301)  ( ASTM-CF8-A351)

 

Vana Ölçüsü (p) d L H W S Cv Factor TOROUE INCH LBS KGS
1/4" 11.6 50 48 120 28.5 6 36 0.30
3/8" 12.7 60 48 120 28.5 7 36 0.30
1/2" 15 75 49 120 28.5 10 43 0.35
3/4" 20 80 55 130 34.8 25 65 0.58
1" 25 90 69 155 34.8 35 101 1.04
1-1/4" 32 110 77 155 38.1 46 158 1.54
1-1/2" 39 120 84 185 38.1 80 187 2.26
2"  50.8 140 93 185 38.1 110 230 3.80
2-1/2" 65 185 138 250 65.0 310 430 6.80
3"  80 205 149 250 65.0 360 1380 11.58
4" 100 240 155 280 65.0 820 2400 23.00

 

Vana Ölçüsü (p) d L H W S Cv Factor TOROUE INCH LBS KGS
1/4" 11.6 50 48 120 28.5 6 36 0.30
3/8" 12.7 60 48 120 28.5 7 36 0.30
1/2" 15 75 49 120 28.5 10 43 0.35
3/4" 20 80 55 130 34.8 25 65 0.58
1" 25 90 69 155 34.8 35 101 1.04
1-1/4" 32 110 77 155 38.1 46 158 1.54
1-1/2" 39 120 84 185 38.1 80 187 2.26
2"  50.8 140 93 185 38.1 110 230 3.80
2-1/2" 65 185 138 250 65.0 310 430 6.80
3"  80 205 149 250 65.0 360 1380 11.58
4" 100 240 155 280 65.0 820 2400 23.00
<

FEATURES :

  • Pipe thread in accordance with ANSI B2.1. BS21. DIN 259/2999.
  • With mounting pads.
  • Blow-out proof stem/Full bore
  • Investment cantıng body and cap
  • 1000 PSI (69 BAR) W.O.G/2000 PSI B(138 BAR ) W.O.G
  • Locking device Lug body.

 

 

 

 

 

 

 

 

ITEM PARTS
METERIAL QTY
1 BODY ASTM-CF8M 1
2 CAP ASTM-CF8M  2
3 BALL CF8 OR CF8M 1
4

SEAT

REIN TEFLON 15% GFT 2
5 STEM AISI 304 OR 316 1
6 THRUST WASHER REIN TEFLON 15% GFT 1
7 STEM PACKING PTFE 2
8 BOLT AISI 304 4(4"X6 set )
9 HEX NUT AISI 304 4
10 BOLT WASHER AISI 304 4
11 GLAND NUT AISI 304 1
12 STEM WASHER AISI 304 1
13 STEM NUT AISI 304 1
14 HANDLE AISI 304 1
15 PLASTIC COVER PLASTIC 1
16 LOCK DEVICE AISI 304 1

 

 

Vana Ölçüsü (p) A B C F G ISO 5211
1/4" 11.5 32.5 50 36 M5 FOR F03
3/8" 12.7 32.5 60 36 M5 FOR F03
1/2" 15 34.5 75 36 M5 FOR F03
3/4" 20 42.5 80 42 M5 FOR F04
1" 25.4 46.5 90 42 M5 FOR F04
1-1/4" 32 55 110 50 M5 FOR F05
1-1/2" 38 65 120 70 M56 FOR F07
2"  50.8 76 140 70 M6 FOR F07
2-1/2" 65 92.5 185 120 M8 FOR F10
3"  80 106 205 120 M8 FOR F10
4" 100 135 240 120 M8 FOR F10

FEATURES :

  • Pipe thread in accordance with ANSI B2.1. BS21. 1973, DIN 259/2999
  • Locking device Lug body.
  • Blow-out proof stem/full port
  • Investment casting body and cap
  • 1000 PSI (69 BAR) W.O.G
  • Mounting Flanged for ISO Standard 5211
  • Screwed end,but weld end, socked weld end
  • Metarial:ASTM-CF8M-A351,ASTM-CF8-A351 & ASTM--A216-WCB,

 

 

Ürün Galeri
Küresel vana (Ball valves) 2 parçalı, 3 parçalı
Küresel vana (Ball valves) 2 parçalı, 3 parçalı